Detailed Product Description

Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group

Injection unit:
1) Four injection pressures and speeds with three additional
pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
position, providing optimum. Injection accuracy and control
6) Temperature control
7) Heating status indication

Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position

Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed on both front and rear of machine to provide
easy access
 

Main specification of HMW10800		Screw A	Screw B	Screw C
Injection Unit
Screw Diameter	mm	110	120	130
Screw L/D Ratio	L/D	22	20.2	18.6
Shot Volume (theoretical)	CM³	4618	5496	6450
Injection Weight (PS)	g	4202	5001	5870
Injection Rate	g/s	806	936	1099
Plasticizing Capacity	g/d	101	112	125
Injection Pressure	MPa	178	150	127
Screw Speed	rpm	0-110
Clamping Unit
Clamp Force	KN	10800
Toggle Stroke	mm	1120
Max. Mould Height	mm	1200
Min. Mould Height	mm	450
Space Between Tie Bars (W×H)	mm	1100x1100
Ejector Force	KN	245
Ejector Stroke	mm	320
Ejector Numbers	n	21
Others
Max Pump Pressure	MPa	16
Pump Motor Power	kW	45+45
Heater Power	kW	68.5
Machine Dimension (L×W×H)	m	14.15x2.6x3.5
Machine Weight	T	60
Hopper Capacity	L	100
Oil Tank Capacity	L	1700